MLESD24B-0603 multilayer polymer ? esd protection for high speed data lines to inches mm dim min max min max note a . 059 . 067 1.50 1.70 b . 0 27 . 0 3 6 0.70 0.90 c . 0 1 3 . 017 0.33 0.43
omp onents 20736 marilla street chatsworth
m c c iec61000-4-2 esd contact discharge 8kv , max 15kv iec61000-4-2 esd air discharge 15kv , max 25kv ? multilayer structure ? surface mount ? extremely low capacitance ? very low leakage current ? fast response time ? bi-directional esd protection ? lead free solder termination ? the best esd protection for high frequency, low voltage appl ications features application ? high definition multi-media interface (hdmi) ? digital visual interface (dvi) ? display port interface ? unified display interface (udi) ? mddi ports ? gigabit ethernet ? usb2.0 and ieee1394 interface * caution: this component is designed for signal li ne protection only, not intended to be used under bias, not for application with a power l ine. dimensions 0603 d . 01 5 . 018 0.40 0.45 e . 035 . 0 40 0.90 1.00 f . 023 . 028 0.60 0.70 g . 051 . 05 6 1.30 1.40 environmental specifications ? operation temperature: -40~90 ? moisture resistance, steady state: mil-std-833,method 10 04.7, 85% rh,85 ,1000hrs ? thermal shock: mil-std-202,method 107g,- 55 to150 ,30 min cycle,10 cycles. ? vibration: mil-std-202f, method 201a, (10 to 55 to 10hz, 1 mi n. cycle, 2hrs each in x-y-z) ? chemical resistance: astm d-543, 4hrs @40 , 3 solutions(h 2 o, detergent solution, deluxer ) ? solder leach resistance and terminal adhesion: per eia-576 test www. mccsemi .com 1 of 4 revision:2 2009/04/08 esd suppressor tm micro commercial components suggested solder pad layout e f g
tm micro commercial components electrical characteristics electrical characteristics parameter symbol conditions min typ max units continuous operating voltage v dc --- --- --- 24 v trigger voltage v t iec61000-4-2 8kv contact discharge --- 500 --- v clamping voltage v c ec61000-4-2 8kv contact discharge --- 36 --- v leakage current i l 24v v dc --- 0.20 10 na capacitance c p vr = 0v, f = 1mhz --- 0.15 0.3 pf operating temperature --- --- -40 --- 90 storage temperature --- --- -55 --- 150 esd pulse withstand pulses ec61000-4-2 8kv contact discharge 2000 --- --- --- notes: 1, trigger and clamping voltage measure per iec 61000-4-2, 8kv direct discharge method www. mccsemi .com 2 of 4 revision:2 2009/04/08 MLESD24B-0603 m c c typical mlesd clamping for +8kv pulse per iec61000-4-2
tm micro commercial components design recommendations for usb2.0 for usb2.0 port MLESD24B-0603 design recommendations for antenna for antenna line MLESD24B-0603 www. mccsemi .com 3 of 4 revision:2 2009/04/08 MLESD24B-0603 m c c
m c c tm micro commercial components products are represented on our website, harmless against all damages. ***applications disclaimer*** ***important notice*** aerospace or military applications. products offer by micro commercial components corp . are not intended for use in medical, micro commercial components corp . reserve s the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . micro commercial components corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . the user of products in such applications shall assume all risks of such use and will agree to hold micro commercial components corp . and all the companies whose ordering information device packing (part number)-tp tape&reel;5kpcs/reel 3 www. mccsemi .com 4 of 4 revision:2 2009/04/08
|
